NCL OMNISTIK - TE 106 TILE ADHESIVE

Price 6980.0 INR/ Kilograms

Get a Price/Quote

MOQ : 1 Kilograms

NCL OMNISTIK - TE 106 TILE ADHESIVE Trade Information

Minimum Order Quantity
1 Kilograms

Delivery Time
1 Days

About NCL OMNISTIK - TE 106 TILE ADHESIVE

91 000 74051 NCL OMNISTIK TE-106 is a cement-based, polymer-modified, single-component thin-bed tile adhesive from NCL Buildtek.
It comes as a dry-powder blend you just add the recommended amount of water at site, mix, and apply. No need for traditional cement-sand mixes.
Its designed for both floor and wall tiling, and supports a wider variety of tiles including ceramic, vitrified, and some stone tiles.

Typical Technical Specs (based on NCL product standards)

Parameter	Specification / Benefit
Tile Types Supported	Ceramic, vitrified tiles; medium-weight natural stones (check tile weight)
Suitable Areas	Interior & exterior walls & floors (except continuously wet outdoor zones)
Bed Thickness	3 mm 10 mm depending on tile size & substrate
Open Time	20 minutes allows adjustments after placing tiles
Pot Life / Working Time	~ 90120 minutes after mixing (varies with temperature)
Time to Light Traffic	~ 24 hours (may vary follow NCL directions)
Coverage	Approx. 34 sq.ft per kg (varies with trowel size & tile type)
Packaging	Commonly available in 20 kg bags
Bond Strength	Meets Indian standards for polymer-modified thin bed adhesives
Conformance	Built to match performance standards similar to IS 15477 (Type 1 & T grade performance)

Note: Exact numbers may slightly vary depending on batch always check the batch label or official TE-106 datasheet before use.

Where & When to Use OMNISTIK TE-106

Best uses:
Standard-size ceramic or vitrified tiles on walls & floors
Interior living spaces, balconies, kitchens, bathrooms
Residential and light commercial applications
New constructions and renovation jobs
Situations needing fast and consistent bonding without manual mortar mixing

Especially good because:

Its easy to mix / ready to use saves labor and time on site
Gives consistent strength, reduced chances of hollow spots, and good adhesion
Works on multiple substrates like concrete, plaster, screed, etc.

What to Check / When to Use Carefully

Ensure the substrate is clean, level, stable, and free of dust/oil/loose particles.
Avoid use in continuously wet environments or heavy water exposure areas (like outdoor pool edges) unless paired with proper waterproofing.
For very large or very heavy stone tiles (marble/granite/slabs) consider a stronger/high-flex adhesive (e.g., NCL Cerostik TI-103, Tilostik TE-105, or NCL Platinum-grade adhesives).
Follow proper trowel notch size and full-bed application to eliminate voids under tiles.