About

•  91 000 74051 NCL OMNISTIK TE-106 is a cement-based, polymer-modified, single-component thin-bed tile adhesive from NCL Buildtek.

• It comes as a dry-powder blend you just add the recommended amount of water at site, mix, and apply. No need for traditional cement-sand mixes.

• Its designed for both floor and wall tiling, and supports a wider variety of tiles including ceramic, vitrified, and some stone tiles.

Note: Exact numbers may slightly vary depending on batch always check the batch label or official TE-106 datasheet before use.

Best uses:
Standard-size ceramic or vitrified tiles on walls & floors
Interior living spaces, balconies, kitchens, bathrooms
Residential and light commercial applications
New constructions and renovation jobs
Situations needing fast and consistent bonding without manual mortar mixing

Especially good because:

• Its easy to mix / ready to use  saves labor and time on site

• Gives consistent strength, reduced chances of hollow spots, and good adhesion

• Works on multiple substrates like concrete, plaster, screed, etc.

• Ensure the substrate is clean, level, stable, and free of dust/oil/loose particles.

• Avoid use in continuously wet environments or heavy water exposure areas (like outdoor pool edges) unless paired with proper waterproofing.

• For very large or very heavy stone tiles (marble/granite/slabs)  consider a stronger/high-flex adhesive (e.g., NCL Cerostik TI-103, Tilostik TE-105, or NCL Platinum-grade adhesives).

• Follow proper trowel notch size and full-bed application to eliminate voids under tiles.