MYK ARMENT AQUAARM SPU SPL GREEN (25KG)

Price 5892.0 INR/ Kilograms

Get a Price/Quote

MOQ : 25 Kilograms

MYK ARMENT AQUAARM SPU SPL GREEN (25KG) Specification

Solubility
Water

Grade
Industrial Grade

Purity
High

Application
Waterproofing and repairs

Place of Origin
India

Advantage
Water resistance, UV resistance

MYK ARMENT AQUAARM SPU SPL GREEN (25KG) Trade Information

Minimum Order Quantity
25 Kilograms

Supply Ability
1000 Kilograms Per Month

Delivery Time
1 Days

About MYK ARMENT AQUAARM SPU SPL GREEN (25KG)

91 000 74051 AquaArm SPU SPL A single-component, high-performance, bitumen-free, polyurethane waterproofing coating. It is moisture-cured, meaning it reacts with humidity in the air to form a highly elastic, seamless, and durable membrane.

Primary Function: To provide a robust, flexible, and chemical-resistant waterproofing barrier for critical areas, both above and below ground, where a high-quality, non-bituminous solution is required.

Key Features & Benefits (from TDS):

Bitumen-Free & High Performance: Offers superior elasticity and longevity compared to many modified-bitumen products.

High Elasticity: Exceptional elongation (500%) to bridge dynamic cracks (2mm).

Excellent Adhesion: Strong peel adhesion to concrete (2.0 N/mm).

Durable: Resistant to hydrostatic pressure, punctures, tears, and chemical ingress.

Environmentally-Friendly: Non-toxic once cured.

Single Component: Ready to use; no on-site mixing required, ensuring consistent quality.

Q1: How is this different from other waterproofing coatings?

A: Its key differentiator is that it is a high-performance, bitumen-free polyurethane. This gives it better elasticity, durability, and environmental credentials compared to bitumen-based or acrylic coatings. It is also single-component, unlike 2-part PU systems.

Q2: What is the application process?

Surface Prep: Concrete must be strong, smooth, clean, and dry (moisture <5%). All corners must be rounded (50mm internal, 10mm external).

Priming: It is mandatory to apply FloArm Primer PUDC on the prepared surface.

Application: Apply the first coat of SPU SPL. Apply the second coat after approx. 12 hours (at 28C) in a direction perpendicular to the first.

Protection: The membrane must be protected with a screed or suitable covering.

Q3: What is the coverage area?

A: The theoretical consumption is ~1.5 kg per square meter to achieve a 1mm Dry Film Thickness (DFT). Actual consumption will depend on surface porosity and roughness.

Q4: How long does it take to dry and cure?

Surface Dry: 12 hours

Fully Dry: 24 hours

Recoat Time: ~12 hours (at 28C)

Water Test: Can be performed only after the membrane is fully cured.

Q5: What is the shelf life and how should it be stored?

A: The shelf life is 6 months from the date of manufacture. It has very specific storage requirements:

Store in a cool, dry, moisture-free, shaded place.

Transport and store the pails upside down (inverted position) to prevent skin formation.

Once opened, the material must be used within 30 minutes.

Q6: What are the critical limitations?

Not root resistant.