DR.FIXIT REPAIR PRO MICRO CONCRETE (25 KG) Specification
- Solubility
- Mixes with potable water
- Advantage
- Non-shrink, flowable, high-strength repair mortar for inaccessible areas
- Material
- Special cementitious blend - micro concrete
- Usage
- Repair of damaged concrete structures such as columns, beams, floors and areas where access is restricted; jacketing of RCC columns; pile head repairs
- Lead Time
- Best before 6 months from month of manufacturing if stored in original unopened packaging under cool and dry place away from direct sunlight
- Product Type
- Micro Concrete Repair Mortar
- Application
- Pour or pump into watertight shuttering after mixing with water
- Viscosity
- Not specified; forms a flowing mortar after mixing
- Appearance
- Powder form, grey in colour
- Shelf Life
- 6 months from manufacturing if stored properly
- Storage Condition
- Store in a cool, dry place away from direct sunlight in unopened original packaging
- Application Method
- Add powder slowly to water while mixing with a slow-speed electric mixer to create a flowing mortar; pour or pump into suitable shuttering.
- Curing Time
- Minimum 7 days if exposed.
- Coverage
- 1.2 m2 per 25 kg pack at 10 mm thickness.
- Formwork
- Wrap any formwork in polythene for clean release. Seal joints with suitable sealant.
- Packaging
- 25 kg moisture resistant bag
- Mixing Ratio
- Add 3.25 to 3.5 litres of clean potable water to 25 kg micro concrete and mix for 2-3 minutes.
- Yield
- 12.7 litres per 25 kg at Water/Powder ratio of 0.14
- Surface Preparation
- Surface should be sound, stable, clean, free from laitance, paint, oil, grease, and residual mould release agents and curing compounds. Metal surfaces must be free from rust, scaling or paint and abraded to reveal bright metal.
DR.FIXIT REPAIR PRO MICRO CONCRETE (25 KG) Trade Information
- Minimum Order Quantity
- 1 Kilograms
About DR.FIXIT REPAIR PRO MICRO CONCRETE (25 KG)
91 000 74051 Dr. Fixit Micro Concrete is a ready to use dual shrinkage compensated dry powder, requiring only the addition of clean water to produce a free flowing dimensionally stable micro concrete.