DR.FIXIT BITUFIX WATERPROOFING CHEMICALS IN HYDERABAD

About DR.FIXIT BITUFIX WATERPROOFING CHEMICALS IN HYDERABAD

 91 000 74051 Dr. Fixit Bitufix is a water-based emulsified thixotropic bitumen coating formulated for damp proofing below-ground concrete structures above the water table. It dries to form a flexible black barrier that combats moisture, salts, and vapor transmission. Ideal for damp-proof course (DPC), footings, masonry walls, plinth beams, and as a moisture vapor barrieralso used in built-up roofing systems.
Key Features & BenefitsFlexible bitumen film resists water vapor and dampness. Water-based and cold applied safe, easy to use, full adhesion to concrete surfaces. Resists attack from chlorides and sulphates in soils. Non-flammable, suitable for confined or underground spaces. Economical coverage good area per liter/coat.
Q1. Can Bitufix be applied in hot weather / direct sunlight?It can be applied up to 55 C, but avoid direct intense sunlight when applying. Q2. Is Bitufix suitable for below ground where there is hydrostatic pressure?Its meant for structures above the water table. For full hydrostatic water pressure situations, other more specialized injection or membrane systems are more appropriate. Q3. How much area will 20 L cover?Approx 80 m for one coat at 4 m/L; for two coats you will need double that. Actual coverage depends on surface porosity & texture.Q4. How long does it take to dry between coats?Allow the first coat to fully dry before applying the next. Usually within a few hours depending on temperature and ventilation.Q5. How long before the area can be back-filled or exposed?After full drying (firm set), which generally takes 24 hours, but site conditions may vary.Q6. Whats the approximate price (5 L / 20 L)?Price for 5 L bucket is about 630, for 20 L around 2,100