SIKA 30KG NON-METALLIC GREY POWER FLOOR HARDENER FOR WATERPROOFING (SIKA CHAPDHUR) IN HYDERABAD

About SIKA 30KG NON-METALLIC GREY POWER FLOOR HARDENER FOR WATERPROOFING (SIKA CHAPDHUR) IN HYDERABAD

91 000 74051 Sika Chapdur (IN) is a one-part, premixed, coloured mineral dry-shake hardener used for concrete floors. When broadcast and worked into fresh concrete, it creates an extremely hard-wearing, abrasion-resistant, dust-proof surface. Ideal for areas subject to heavy mechanical wear like warehouses, parking lots, factories, service stations, public floors, and more.
Key Features & BenefitsReady to use; simple application method. High wear resistance & impact resistance. Dust-proof surface; easy to clean. Non-metallic, rust-free formula. Increased resistance to oils and grease.
Q1. What is the coverage of one 30 kg bag?A: For heavy duty (5.5-6.0 kg/m), one 30 kg bag will cover approximately 5 to 5.5 m. For lighter duty, higher coverage.Q2. Can I apply this on any concrete/slab?A: The substrate concrete must be good quality, fully compacted, with slump in the range 75-110 mm. Compressive strength of the concrete should be at least 20 N/mm. Surface should be clean and free of weak laitance. Q3. How long before the floor can be used?A: Foot traffic after 72 hours; full service (heavier loads) after 7 days, when fully cured. Q4. Is this product suitable where oil / grease / chemical spillage happens?A: Yes the product has increased resistance to oils and grease. However, frequent cleaning and maintenance are needed.Q5. What precautions should I take during application?A:Do not apply in strong wind or excessively dry air.Do not add water over the dry shake once applied.Spread in two stages for better blending: first 60% then 40%.Use proper finishing tools (trowels, power trowels) to compact and smooth.Cure immediately after finishing, protect from rain or contamination.

Exceptional Strength and Durability

SIKA CHAPDHUR stands out due to its superior compressive strength exceeding 75 N/mm2 and flexural strength above 9 N/mm2 after 28 days. Its non-metallic mineral composition provides high resistance to abrasion, enhancing floor life by up to 300%. These characteristics make it ideal for areas facing heavy mechanical stress, guaranteeing long-lasting industrial performance.


Seamless Waterproofing and Dustproofing

This power floor hardener delivers excellent waterproofing by reducing water absorption to a minimum. Once applied, it prevents dusting and significantly contributes to a clean and hygienic workspace. Its smooth, dense finish is resistant to liquids and dust, making it highly recommended for factories, warehouses, and production units in Hyderabad.


Simple Application and Safe Handling

Application involves sprinkling and power-trowelling the powder onto freshly laid concrete. For best performance, apply 3-5 kg per square meter based on the surface requirements. Always use gloves and eye protection, and avoid inhaling dust during installation. The product is non-toxic when used as directed, making it safe for operators and the environment.