Back to top
CRYSTALLINE COATING SIKA 101H
CRYSTALLINE COATING SIKA 101H
CRYSTALLINE COATING SIKA 101H
CRYSTALLINE COATING SIKA 101H
CRYSTALLINE COATING SIKA 101H
CRYSTALLINE COATING SIKA 101H

CRYSTALLINE COATING SIKA 101H

Price 4500.0 INR/ Piece

MOQ : 1 Piece
 

CRYSTALLINE COATING SIKA 101H Trade Information

  • Minimum Order Quantity
  • 1 Piece
  • Delivery Time
  • 1 Days
 

About CRYSTALLINE COATING SIKA 101H

 91 000 74051 Sika Injection-101 IN is a two-component, water-reactive polyurethane resin that foams when it contacts water, forming a flexible, hydrophobic closed-cell foam. Its designed for stopping running water leaks, filling cracks and joints in concrete under hydrostatic pressureideal for foundations, tunnels, water tanks, retaining walls, basements etc. 
Key Features & Benefits
Low viscosity resin for deep penetration into cracks & voids. Produces a flexible, closed-cell foam that is hydrophobic and resists future water ingress. Reacts with water to foam up to 40 its original volume. Fast gel time (10 seconds) allowing quick sealing. Comes pre-batched (5 kg kit: 4.5 kg base + 0.5 kg catalyst) for ease of use. Suitable for use under hydrostatic pressure.
Q1. How is Sika Injection-101 IN applied?Clean the crack/joint (remove loose particles, oil, wax).Seal around the injection packer (if needed) to avoid resin escaping.Mix Part A (base) and Part B (catalyst) at 90:10 ratio (or adjust within allowed limits for reaction time). Use injection pump to inject resin at low pressure, allow foam to expand and seal.Once set, clean away excess.Q2. What is gel time & cure time?Gel time is about 10 seconds at 25-30 C. Tack-free / initial curing takes 2 hours. Q3. What are the packaging & storage details?Comes as a pre-batched 5.0 kg kit: 4.5 kg base (Part A) + 0.5 kg catalyst (Part B). Store in sealed, unopened containers at 5-30 C. Shelf-life 12 months. Q4. Is it safe for potable water or for use in drinking water tanks?It is hydrophobic and resistant to fungi/microorganisms. But products like this are generally for structural waterproofing, not for direct contact with potable water without checking specific approvals. Always check local PDS / safety data. Q5. What surface temperature and ambient conditions are needed?Both ambient and substrate temperatures should be between +10 C to +40 C. Q6. How much does it cost (rough estimate)?Please Visit or Contact CivilizeMart More Information
Tell us about your requirement
product

Price:

Quantity
Select Unit

  • 50
  • 100
  • 200
  • 250
  • 500
  • 1000+
Additional detail
Mobile number

Email

More Products in 11 SPECIAL PRODUCTS IN WATERPROOFING Category

sika monotop - 108  instantly plugging active leaks in basement,tanks & concrete walls

sika monotop - 108 instantly plugging active leaks in basement,tanks & concrete walls

Price 435.0 INR / Bag

Minimum Order Quantity : 1 Bag

Solubility : Insoluble in Water (Sets on Contact with Water

Material : Cement, Graded Aggregates & Special Chemical Additives

Advantage : Rapid Setting, Stops Active Water Leakage, High Strength, NonShrink, Easy to Apply, Excellent Bonding, Durable, Suitable for Interior & Exterior Applications

Grade : Construction Grade

Sika Monotop 108 Water Plug In

Sika Monotop 108 Water Plug In

Price 435.0 INR / Bag

Minimum Order Quantity : 1 Bag

Solubility : In water

Material : Cementbased compound

Advantage : Rapid setting, easy to use, stops leaks instantly

Grade : Industrial

NCL VITRISTIK TE-104(20KG)

NCL VITRISTIK TE-104(20KG)

Price 455.0 INR / Kilograms

Minimum Order Quantity : 1 Kilograms

SIKA CHAPDUR FLOOR HARDENER (Floor Coating)

SIKA CHAPDUR FLOOR HARDENER (Floor Coating)

Price 450.0 INR / Unit

Minimum Order Quantity : 1 Bag