MYK ARMENT REARM RUST -C सप्लायर, हैदराबाद में व्यापारी

जांच भेजें

Request To Call Back

Price 147.0 आईएनआर/ Number

मूल्य/उद्धरण प्राप्त करें

MOQ : 1 Kilograms

Trade Information

Minimum Order Quantity
1 Kilograms

डिलीवरी का समय
दिन

नमूना उपलब्ध
Yes

मुख्य निर्यात बाजार

About

Product Name: ReArm Rust C (Formerly MYK Rust Convertor)

What it is: A single-component, ready-to-use chemical solution designed to treat and convert stubborn rust on iron and steel surfaces into a stable, protective layer. It transforms rust (iron oxide) into an organo-complex compound, sealing the surface and preventing further corrosion.

Primary Function: To provide a simple, effective solution for rust treatment without the need for expensive sandblasting or extensive surface preparation. It creates a moisture-repelling, abrasion-resistant coating that serves as an ideal base for topcoats of paint.

Key Features & Benefits (from TDS):

Converts Rust: Chemically changes rust into a stable, protective black layer.

Excellent Adhesion: Provides a strong bond for subsequent paint layers.

Moisture Repellent: Forms a non-porous barrier that prevents moisture from reactivating the corrosion process.

Abrasion Resistant: The converted layer has good mechanical stability.

Cost-Effective: Eliminates the need for sandblasting in many cases.

Easy Application: Simply brush or roll on after basic surface prep.

Q1: Do I need to sandblast the surface before applying ReArm Rust C?

A: No. A key benefit of this product is that it eliminates the need for sandblasting. However, all loose and flaking rust must be removed using a stiff wire brush. The surface should be cleaned and degreased for the product to work effectively.

Q2: How do I apply it?

Prepare Surface: Remove loose rust with a wire brush. Clean and degrease the surface.

Apply Product: Apply ReArm Rust C generously using a brush or roller.

Drying/Curing: It dries to touch in 20 minutes but requires 24 hours to fully cure and complete the rust conversion process.

Second Coat: For best results, a second coat is recommended.

Topcoat: If applying an oil-based paint, wait 48 hours after the last coat of ReArm Rust C.

Q3: What does it do to the rust?

A: It does not remove the rust. Instead, it chemically converts the rust (iron oxide) into a stable, black, organo-complex compound that is moisture-repelling and acts as a protective layer.

Q4: Can I paint over it?

A: Yes. In fact, it is designed to be an ideal base for paint. Once fully cured (after 24-48 hours), you can apply most standard topcoats for additional protection and aesthetics.

Q5: What is the shelf life?

A: The product has a shelf life of 36 months (3 years) from the date of manufacture when stored in its original, sealed container in a cool, dry, shaded place.

Q6: Is it safe to use?

A: Caution Required. The product is corrosive and has a low pH (2 - 3.5). You must wear appropriate Personal Protective Equipment (PPE) including a face mask and rubber gloves. Avoid contact with skin and eyes. In case of contact, flush immediately with plenty of water and seek medical attention if necessary.

Q7: What is the coverage area?

A: The datasheet does not specify a coverage rate as it depends entirely on the rust profile and surface porosity. Heavily rusted, porous surfaces will require more product than lightly rusted, smooth surfaces.

Tell us about your requirement