BOSTIK BLOCK P530 BOSCOSEAL PU-D सप्लायर, हैदराबाद में व्यापारी

जांच भेजें

Request To Call Back

Price 10198.0 आईएनआर/ Kilograms

मूल्य/उद्धरण प्राप्त करें

MOQ : 1 Kilograms

Trade Information

Minimum Order Quantity
1 Kilograms

डिलीवरी का समय
दिन

About

91 000 74051 Bostik Block P530 Boscoseal PU-D A one-component, water-based, fast-setting polyurethane elastomeric waterproofing membrane. It is a liquid-applied coating that cures to form a seamless, flexible, and highly durable protective layer.

Primary Function: To provide a high-performance, UV-resistant waterproofing barrier for a wide range of substrates, capable of bridging cracks and accommodating structural movement.

Key Features & Benefits:

Water-Based & Eco-Friendly: Low VOC, non-flammable, and easier cleanup compared to solvent-based alternatives.

High Performance: Withstands 5 bars of hydrostatic pressure and bridges cracks over 3mm.

Fast Setting: Recoat in 1-2 hours; ready for tiling in 4-6 hours under ideal conditions (22C, 50% RH).

Excellent Adhesion: Bonds strongly to concrete, masonry, plasterboard, FC sheets, and plywood.

UV Resistant: Can be left exposed in external applications with light foot traffic.

Damp Surface Tolerant: Can be applied on slightly damp substrates (SSD condition).

Questions & Answers (Q&A)

Q1: How is this different from other waterproofing membranes?

A: Its key differentiator is that it is a water-based, fast-setting polyurethane. This combines the high performance of PU (elasticity, crack bridging) with the safety and ease of use of a water-based product

Q2: What is the application process?

Surface Prep: Concrete must be sound, cured (28 days), and rough (like sandpaper). Clean thoroughly of all dust, grease, and laitance.

Priming: Apply one coat of Bostik Bosco Crete/Block A350 Power mix primer and let it dry completely.

Mixing: Stir the PU-D thoroughly for 3-4 minutes with a slow-speed drill to avoid air bubbles.

Application: Apply the first coat by brush, roller, or spray. Apply the second coat after 1-2 hours in the opposite direction.

Curing: Allow 5-7 days for full cure before subjecting it to water or service conditions.

Q3: How quickly can I tile over it?

A: You can tile over it after 4-6 hours of the final application (at 22C & 50% RH) using a compatible Bostik tile adhesive.

Q4: What is the coverage area?

A: To achieve a 1mm Dry Film Thickness (DFT), the consumption is 2.0 - 2.2 kg per square meter in two coats.

Q5: Can it be used in permanently submerged areas?

A: No. The TDS states it is not recommended for direct permanent immersion unless it is protected by a concrete screed or other approved protection course.

Q6: What are the critical precautions?

Do not apply on dusty or contaminated surfaces.

Protect from rain and water for 5-7 days after application.

Wear flat-soled rubber shoes during application to avoid damaging the fresh coating.

Ensure adequate ventilation during application in confined spaces.

Q7: How do I clean tools?

A: Clean all tools with water immediately after use before the product sets. Once hardened, cleaning requires solvents like white spirit or xylene.

Q8. What is the Bostik Block P530 Boscoseal PU-D approx. price?

CIVILIZEMART price generally ranges 10000 12000 per PIECE

Tell us about your requirement